# *REQUIRED*
# The default PATH settings, for superuser and normal users.
# (they are minimal, add the rest in the shell startup files)
ENV_SUPATH PATH=/sbin:/bin:/usr/sbin:/usr/bin
ENV_PATH PATH=/bin:/usr/bin
# Directory where mailboxes reside, _or_ name of file, relative to the home directory.
# If you _do_ define both, MAIL_DIR takes precedence.
MAIL_DIR /var/spool/mail
#MAIL_FILE .mail
# Password aging controls:
# PASS_MAX_DAYS Maximum number of days a password may be used.
# PASS_MIN_DAYS Minimum number of days allowed between password changes.
# PASS_MIN_LEN Minimum acceptable password length.
# PASS_WARN_AGE Number of days warning given before a password expires.
PASS_MAX_DAYS 99999
PASS_MIN_DAYS 0
#PASS_MIN_LEN 5 *np
PASS_WARN_AGE 7
########## end of required entries #########
# Enable "syslog" logging of su activity - in addition to sulog file logging.
# SYSLOG_SG_ENAB does the same for newgrp and sg.
SYSLOG_SU_ENAB yes
SYSLOG_SG_ENAB yes
# su activity is log file.
#SULOG_FILE /var/log/sulog
#Root logins will be allowed only upon these devices.
#full pathname of a file containing device names or
# a ":" delimited list of device names.
CONSOLE /etc/securetty
# name of file whose presence which will inhibit non-root logins.
# The contents of this file should be a message indicating why logins are inhibited.
#NOLOGINS_FILE /etc/nologin *np
CONSOLE console:tty01:tty02:tty03:tty04
# ":" delimited list of "message of the day" files to be displayed upon login.
#MOTD_FILE /etc/motd *np
#MOTD_FILE /etc/motd:/usr/lib/news/news-motd *np
# file will be output before each login prompt.
# file which inhibits all the usual chatter during the login sequence.
# If a full pathname, then hushed mode will be enabled if the user's name or shell are found in the file.
# If not a full pathname, then hushed mode will be enabled if the file exists in the user's home directory.
HUSHLOGIN_FILE .hushlogin
#HUSHLOGIN_FILE /etc/hushlogins
# either a TZ environment parameter spec or the
# fully-rooted pathname of a file containing such a spec.
#ENV_TZ TZ=CST6CDT *np
#ENV_TZ /etc/tzname *np
ISSUE_FILE /etc/issue *np
# file which maps tty line to TERM environment parameter.
# Each line of the file is in a format something like "vt100 tty01".
#TTYTYPE_FILE /etc/ttytype
# the command name to display when running "su -".
# For example, if this is defined as "su" then a "ps" will display the
# command is "-su".
# If not defined, then "ps" would display the
# name of the shell actually being run, e.g. something like "-sh".
SU_NAME su
# an HZ environment parameter spec.
# for Linux/x86
#ENV_HZ HZ=100 *np
# For Linux/Alpha...
#ENV_HZ HZ=1024 *np
# Terminal permissions
# TTYGROUP Login tty will be assigned this group ownership.
# TTYPERM Login tty will be set to this permission.
# If you have a "write" program which is "setgid" to a special group
# which owns the terminals, define TTYGROUP to the group number and
# TTYPERM to 0620. Otherwise leave TTYGROUP commented out and assign
# TTYPERM to either 622 or 600.
TTYGROUP tty
TTYPERM 0600
# Login configuration initializations:
# ERASECHAR Terminal ERASE character ('\010' = backspace).
# KILLCHAR Terminal KILL character ('\025' = CTRL/U).
# UMASK Default "umask" value.
# ULIMIT Default "ulimit" value.
# The ERASECHAR and KILLCHAR are used only on System V machines.
# The ULIMIT is used only if the system supports it.
# (now it works with setrlimit too; ulimit is in 512-byte units)
# Prefix these values with "0" to get octal, "0x" to get hexadecimal.
ERASECHAR 0177
KILLCHAR 025
UMASK 022
#ULIMIT 2097152 *np
#
# user must be listed as a member of the first gid 0 group
# in /etc/group (called "root" on most Linux systems) to be able to "su"
# to uid 0 accounts. If the group doesn't exist or is empty, no one
# will be able to "su" to uid 0.
#SU_WHEEL_ONLY yes *np
# If compiled with cracklib support, where are the dictionaries
#CRACKLIB_DICTPATH /usr/lib/cracklib_dict *np
# Min/max values for automatic uid selection in useradd
UID_MIN 1000
UID_MAX 60000
# Min/max values for automatic gid selection in groupadd
GID_MIN 100
GID_MAX 60000
# Max number of login retries if password is bad
LOGIN_RETRIES 3
# Max time in seconds for login
LOGIN_TIMEOUT 60
# Delay in seconds before being allowed another attempt after a login failure
FAIL_DELAY 3
# Enable logging and display of /var/log/faillog login failure info.
#FAILLOG_ENAB yes *np
# Enable display of unknown usernames when login failures are recorded.
LOG_UNKFAIL_ENAB no
# Enable logging of successful logins
LOG_OK_LOGINS no
# login failures will be logged here in a utmp format.
# last, when invoked as lastb, will read /var/log/btmp, so...
#FTMP_FILE /var/log/btmp *np
# Enable logging and display of /var/log/lastlog login time info.
#LASTLOG_ENAB yes *np
# Enable checking and display of mailbox status upon login.
# Disable if the shell startup files already check for mail
# ("mailx -e" or equivalent).
#MAIL_CHECK_ENAB no *np
# Enable checking of time restrictions specified in /etc/porttime.
#PORTTIME_CHECKS_ENAB yes *np
# Enable setting of ulimit, umask, and niceness from passwd gecos field.
#QUOTAS_ENAB yes *np
# Maximum number of attempts to change password if rejected (too easy)
#PASS_CHANGE_TRIES 5 *np
# Warn about weak passwords (but still allow them) if you are root.
#PASS_ALWAYS_WARN yes *np
# Number of significant characters in the password for crypt().
# Default is 8, don't change unless your crypt() is better.
# Ignored if MD5_CRYPT_ENAB set to "yes".
#PASS_MAX_LEN 8 *np
# Require password before chfn/chsh can make any changes.
#CHFN_AUTH yes *np
# Which fields may be changed by regular users using chfn
# any combination of letters "frwh"
# full name, room number, work phone, home phone
# If not defined, no changes are allowed.
# For backward compatibility, "yes" = "rwh" and "no" = "frwh".
CHFN_RESTRICT rwh
# Password prompt (%s will be replaced by user name).
# XXX - it doesn't work correctly yet, for now leave it commented out
# to use the default which is just "Password: ".
#LOGIN_STRING "%s's Password: " *np
# If set to "yes", new passwords will be encrypted using the MD5-based
# algorithm compatible with the one used by recent releases of FreeBSD.
# It supports passwords of unlimited length and longer salt strings.
# Set to "no" if you need to copy encrypted passwords to other systems
# which don't understand the new algorithm. Default is "no".
# Only if compiled with MD5_CRYPT defined:
#MD5_CRYPT_ENAB yes *np
# Enable additional checks upon password changes.
#OBSCURE_CHECKS_ENAB yes *np
# List of groups to add to the user's supplementary group set
# when logging in on the console (as determined by the CONSOLE setting).
# Default is none.
#
# Use with caution - it is possible for users to gain permanent
# access to these groups, even when not logged in on the console.
# How to do it is left as an exercise for the reader...
#CONSOLE_GROUPS floppy:audio:cdrom
# Should login be allowed if we can't cd to the home directory?
# Default in no.
DEFAULT_HOME yes
# login environment will be read from .
# Every line should be in the form name=value.
#ENVIRON_FILE /etc/environment *np
# this command is run when removing a user.
# It should remove any at/cron/print jobs etc. owned by
# the user to be removed (passed as the first argument).
#USERDEL_CMD /usr/sbin/userdel_local
# Enable setting of the umask group bits to be the same as owner bits
# (examples: 022 -> 002, 077 -> 007) for non-root users, if the uid is
# the same as gid, and username is the same as the primary group name.
#
# This also enables userdel to remove user groups if no members exist.
USERGROUPS_ENAB yes