SMART Error Log Version: 1
ATA Error Count: 8 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 8 occurred at disk power-on lifetime: 2100 hours (87 days + 12 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 08 a0 60 6d 46 Error: UNC 8 sectors at LBA = 0x066d60a0 = 107831456
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 08 a0 60 6d 40 00 02:47:59.100 READ DMA EXT
25 00 08 a0 60 6d 40 00 02:47:55.000 READ DMA EXT
ef 10 02 00 00 00 00 00 02:47:55.000 SET FEATURES [Reserved for Serial ATA]
ef 02 00 00 00 00 00 00 02:47:55.000 SET FEATURES [Enable write cache]
ef aa 00 00 00 00 00 00 02:47:55.000 SET FEATURES [Enable read look-ahead]
Error 7 occurred at disk power-on lifetime: 2100 hours (87 days + 12 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 08 a0 60 6d 46 Error: UNC 8 sectors at LBA = 0x066d60a0 = 107831456
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 08 a0 60 6d 40 00 02:47:55.000 READ DMA EXT
ef 10 02 00 00 00 00 00 02:47:55.000 SET FEATURES [Reserved for Serial ATA]
ef 02 00 00 00 00 00 00 02:47:55.000 SET FEATURES [Enable write cache]
ef aa 00 00 00 00 00 00 02:47:55.000 SET FEATURES [Enable read look-ahead]
ef 03 46 00 00 00 00 00 02:47:55.000 SET FEATURES [Set transfer mode]
Error 6 occurred at disk power-on lifetime: 2100 hours (87 days + 12 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 08 a0 60 6d 46 Error: UNC 8 sectors at LBA = 0x066d60a0 = 107831456
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 08 a0 60 6d 40 00 02:47:25.000 READ DMA EXT
25 00 08 a0 60 6d 40 00 02:47:21.300 READ DMA EXT
2f 00 01 10 00 00 00 00 02:47:21.300 READ LOG EXT
60 10 c0 e8 f3 1c 40 00 02:47:17.600 READ FPDMA QUEUED
60 08 b8 f8 af 25 40 00 02:47:17.600 READ FPDMA QUEUED
Error 5 occurred at disk power-on lifetime: 2100 hours (87 days + 12 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 08 a0 60 6d 46 Error: UNC 8 sectors at LBA = 0x066d60a0 = 107831456
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 08 a0 60 6d 40 00 02:47:21.300 READ DMA EXT
2f 00 01 10 00 00 00 00 02:47:21.300 READ LOG EXT
60 10 c0 e8 f3 1c 40 00 02:47:17.600 READ FPDMA QUEUED
60 08 b8 f8 af 25 40 00 02:47:17.600 READ FPDMA QUEUED
60 08 b0 a0 60 6d 40 00 02:47:17.600 READ FPDMA QUEUED
Error 4 occurred at disk power-on lifetime: 2100 hours (87 days + 12 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 08 a0 60 6d 46 Error: UNC 8 sectors at LBA = 0x066d60a0 = 107831456
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 08 a0 60 6d 40 00 02:47:13.500 READ DMA EXT
ef 10 02 00 00 00 00 00 02:47:13.500 SET FEATURES [Reserved for Serial ATA]
ef 02 00 00 00 00 00 00 02:47:13.500 SET FEATURES [Enable write cache]
ef aa 00 00 00 00 00 00 02:47:13.500 SET FEATURES [Enable read look-ahead]
ef 03 46 00 00 00 00 00 02:47:13.500 SET FEATURES [Set transfer mode]