sshd_config
OpenSSH SSH daemon configuration file
sshd(8) reads configuration data from /etc/ssh/sshd_config (or the file specified with -f on the command line). The file contains
keyword-argument pairs, one per line. For each keyword, the first obtained value will be used. Lines starting with '#' and empty
lines are interpreted as comments. Arguments may optionally be enclosed in double quotes (") in order to represent arguments con-
taining spaces.
Note that the Debian openssh-server package sets several options as standard in /etc/ssh/sshd_config which are not the default in
sshd(8):
o ChallengeResponseAuthentication no
o X11Forwarding yes
o PrintMotd no
o AcceptEnv LANG LC_*
o Subsystem sftp /usr/lib/openssh/sftp-server
o UsePAM yes
The possible keywords and their meanings are as follows (note that keywords are case-insensitive and arguments are case-sensitive):
AcceptEnv
Specifies what environment variables sent by the client will be copied into the session's environ(7). See SendEnv and
SetEnv in ssh_config(5) for how to configure the client. The TERM environment variable is always accepted whenever the
client requests a pseudo-terminal as it is required by the protocol. Variables are specified by name, which may contain
the wildcard characters '*' and '?'. Multiple environment variables may be separated by whitespace or spread across multi-
ple AcceptEnv directives. Be warned that some environment variables could be used to bypass restricted user environments.
For this reason, care should be taken in the use of this directive. The default is not to accept any environment vari-
ables.
AddressFamily
Specifies which address family should be used by sshd(8). Valid arguments are any (the default), inet (use IPv4 only), or
inet6 (use IPv6 only).
AllowAgentForwarding
Specifies whether ssh-agent(1) forwarding is permitted. The default is yes. Note that disabling agent forwarding does not
improve security unless users are also denied shell access, as they can always install their own forwarders.
AllowGroups
This keyword can be followed by a list of group name patterns, separated by spaces. If specified, login is allowed only
for users whose primary group or supplementary group list matches one of the patterns. Only group names are valid; a nu-
merical group ID is not recognized. By default, login is allowed for all groups. The allow/deny directives are processed
in the following order: DenyUsers, AllowUsers, DenyGroups, and finally AllowGroups.
See PATTERNS in ssh_config(5) for more information on patterns.
AllowStreamLocalForwarding
Specifies whether StreamLocal (Unix-domain socket) forwarding is permitted. The available options are yes (the default) or
all to allow StreamLocal forwarding, no to prevent all StreamLocal forwarding, local to allow local (from the perspective
of ssh(1)) forwarding only or remote to allow remote forwarding only. Note that disabling StreamLocal forwarding does not
improve security unless users are also denied shell access, as they can always install their own forwarders.
AllowTcpForwarding
Specifies whether TCP forwarding is permitted. The available options are yes (the default) or all to allow TCP forwarding,
no to prevent all TCP forwarding, local to allow local (from the perspective of ssh(1)) forwarding only or remote to allow
remote forwarding only. Note that disabling TCP forwarding does not improve security unless users are also denied shell
access, as they can always install their own forwarders.
AllowUsers
This keyword can be followed by a list of user name patterns, separated by spaces. If specified, login is allowed only for
user names that match one of the patterns. Only user names are valid; a numerical user ID is not recognized. By default,
login is allowed for all users. If the pattern takes the form USER@HOST then USER and HOST are separately checked, re-
stricting logins to particular users from particular hosts. HOST criteria may additionally contain addresses to match in
CIDR address/masklen format. The allow/deny directives are processed in the following order: DenyUsers, AllowUsers,
DenyGroups, and finally AllowGroups.
See PATTERNS in ssh_config(5) for more information on patterns.
AuthenticationMethods
Specifies the authentication methods that must be successfully completed for a user to be granted access. This option must
be followed by one or more lists of comma-separated authentication method names, or by the single string any to indicate
the default behaviour of accepting any single authentication method. If the default is overridden, then successful authen-
tication requires completion of every method in at least one of these lists.
For example, "publickey,password publickey,keyboard-interactive" would require the user to complete public key authentica-
tion, followed by either password or keyboard interactive authentication. Only methods that are next in one or more lists
are offered at each stage, so for this example it would not be possible to attempt password or keyboard-interactive authen-
tication before public key.
For keyboard interactive authentication it is also possible to restrict authentication to a specific device by appending a
colon followed by the device identifier bsdauth or pam. depending on the server configuration. For example,
"keyboard-interactive:bsdauth" would restrict keyboard interactive authentication to the bsdauth device.
If the publickey method is listed more than once, sshd(8) verifies that keys that have been used successfully are not
reused for subsequent authentications. For example, "publickey,publickey" requires successful authentication using two
different public keys.
Note that each authentication method listed should also be explicitly enabled in the configuration.
The available authentication methods are: "gssapi-with-mic", "hostbased", "keyboard-interactive", "none" (used for access
to password-less accounts when PermitEmptyPasswords is enabled), "password" and "publickey".
AuthorizedKeysCommand
Specifies a program to be used to look up the user's public keys. The program must be owned by root, not writable by group
or others and specified by an absolute path. Arguments to AuthorizedKeysCommand accept the tokens described in the TOKENS
section. If no arguments are specified then the username of the target user is used.
The program should produce on standard output zero or more lines of authorized_keys output (see AUTHORIZED_KEYS in
sshd(8)). If a key supplied by AuthorizedKeysCommand does not successfully authenticate and authorize the user then public
key authentication continues using the usual AuthorizedKeysFile files. By default, no AuthorizedKeysCommand is run.
AuthorizedKeysCommandUser
Specifies the user under whose account the AuthorizedKeysCommand is run. It is recommended to use a dedicated user that
has no other role on the host than running authorized keys commands. If AuthorizedKeysCommand is specified but
AuthorizedKeysCommandUser is not, then sshd(8) will refuse to start.
AuthorizedKeysFile
Specifies the file that contains the public keys used for user authentication. The format is described in the
AUTHORIZED_KEYS FILE FORMAT section of sshd(8). Arguments to AuthorizedKeysFile accept the tokens described in the TOKENS
section. After expansion, AuthorizedKeysFile is taken to be an absolute path or one relative to the user's home directory.
Multiple files may be listed, separated by whitespace. Alternately this option may be set to none to skip checking for
user keys in files. The default is ".ssh/authorized_keys .ssh/authorized_keys2".
AuthorizedPrincipalsCommand
Specifies a program to be used to generate the list of allowed certificate principals as per AuthorizedPrincipalsFile. The
program must be owned by root, not writable by group or others and specified by an absolute path. Arguments to
AuthorizedPrincipalsCommand accept the tokens described in the TOKENS section. If no arguments are specified then the
username of the target user is used.
The program should produce on standard output zero or more lines of AuthorizedPrincipalsFile output. If either
AuthorizedPrincipalsCommand or AuthorizedPrincipalsFile is specified, then certificates offered by the client for authenti-
cation must contain a principal that is listed. By default, no AuthorizedPrincipalsCommand is run.
AuthorizedPrincipalsCommandUser
Specifies the user under whose account the AuthorizedPrincipalsCommand is run. It is recommended to use a dedicated user
that has no other role on the host than running authorized principals commands. If AuthorizedPrincipalsCommand is speci-
fied but AuthorizedPrincipalsCommandUser is not, then sshd(8) will refuse to start.
AuthorizedPrincipalsFile
Specifies a file that lists principal names that are accepted for certificate authentication. When using certificates
signed by a key listed in TrustedUserCAKeys, this file lists names, one of which must appear in the certificate for it to
be accepted for authentication. Names are listed one per line preceded by key options (as described in AUTHORIZED_KEYS
FILE FORMAT in sshd(8)). Empty lines and comments starting with '#' are ignored.
Arguments to AuthorizedPrincipalsFile accept the tokens described in the TOKENS section. After expansion,
AuthorizedPrincipalsFile is taken to be an absolute path or one relative to the user's home directory. The default is
none, i.e. not to use a principals file - in this case, the username of the user must appear in a certificate's principals
list for it to be accepted.
Note that AuthorizedPrincipalsFile is only used when authentication proceeds using a CA listed in TrustedUserCAKeys and is
not consulted for certification authorities trusted via ~/.ssh/authorized_keys, though the principals= key option offers a
similar facility (see sshd(8) for details).
Banner The contents of the specified file are sent to the remote user before authentication is allowed. If the argument is none
then no banner is displayed. By default, no banner is displayed.
CASignatureAlgorithms
Specifies which algorithms are allowed for signing of certificates by certificate authorities (CAs). The default is:
ecdsa-sha2-nistp256.ecdsa-sha2-nistp384,ecdsa-sha2-nistp521,
ssh-ed25519,rsa-sha2-512,rsa-sha2-256,ssh-rsa
Certificates signed using other algorithms will not be accepted for public key or host-based authentication.
ChallengeResponseAuthentication
Specifies whether challenge-response authentication is allowed (e.g. via PAM). The default is yes.
ChrootDirectory
Specifies the pathname of a directory to chroot(2) to after authentication. At session startup sshd(8) checks that all
components of the pathname are root-owned directories which are not writable by any other user or group. After the chroot,
sshd(8) changes the working directory to the user's home directory. Arguments to ChrootDirectory accept the tokens de-
scribed in the TOKENS section.
The ChrootDirectory must contain the necessary files and directories to support the user's session. For an interactive
session this requires at least a shell, typically sh(1), and basic /dev nodes such as null(4), zero(4), stdin(4),
stdout(4), stderr(4), and tty(4) devices. For file transfer sessions using SFTP no additional configuration of the envi-
ronment is necessary if the in-process sftp-server is used, though sessions which use logging may require /dev/log inside
the chroot directory on some operating systems (see sftp-server(8) for details).
For safety, it is very important that the directory hierarchy be prevented from modification by other processes on the sys-
tem (especially those outside the jail). Misconfiguration can lead to unsafe environments which sshd(8) cannot detect.
The default is none, indicating not to chroot(2).
Ciphers
Specifies the ciphers allowed. Multiple ciphers must be comma-separated. If the specified value begins with a '+' charac-
ter, then the specified ciphers will be appended to the default set instead of replacing them. If the specified value be-
gins with a '-' character, then the specified ciphers (including wildcards) will be removed from the default set instead of
replacing them.
The supported ciphers are:
3des-cbc
aes128-cbc
aes192-cbc
aes256-cbc
aes128-ctr
aes192-ctr
aes256-ctr
aes128-gcm@openssh.com
aes256-gcm@openssh.com
chacha20-poly1305@openssh.com
The default is:
chacha20-poly1305@openssh.com,
aes128-ctr,aes192-ctr,aes256-ctr,
aes128-gcm@openssh.com,aes256-gcm@openssh.com
The list of available ciphers may also be obtained using "ssh -Q cipher".
ClientAliveCountMax
Sets the number of client alive messages which may be sent without sshd(8) receiving any messages back from the client. If
this threshold is reached while client alive messages are being sent, sshd will disconnect the client, terminating the ses-
sion. It is important to note that the use of client alive messages is very different from TCPKeepAlive. The client alive
messages are sent through the encrypted channel and therefore will not be spoofable. The TCP keepalive option enabled by
TCPKeepAlive is spoofable. The client alive mechanism is valuable when the client or server depend on knowing when a con-
nection has become inactive.
The default value is 3. If ClientAliveInterval is set to 15, and ClientAliveCountMax is left at the default, unresponsive
SSH clients will be disconnected after approximately 45 seconds.
ClientAliveInterval
Sets a timeout interval in seconds after which if no data has been received from the client, sshd(8) will send a message
through the encrypted channel to request a response from the client. The default is 0, indicating that these messages will
not be sent to the client.
Compression
Specifies whether compression is enabled after the user has authenticated successfully. The argument must be yes, delayed
(a legacy synonym for yes) or no. The default is yes.
DebianBanner
Specifies whether the distribution-specified extra version suffix is included during initial protocol handshake. The de-
fault is yes.
DenyGroups
This keyword can be followed by a list of group name patterns, separated by spaces. Login is disallowed for users whose
primary group or supplementary group list matches one of the patterns. Only group names are valid; a numerical group ID is
not recognized. By default, login is allowed for all groups. The allow/deny directives are processed in the following or-
der: DenyUsers, AllowUsers, DenyGroups, and finally AllowGroups.
See PATTERNS in ssh_config(5) for more information on patterns.
DenyUsers
This keyword can be followed by a list of user name patterns, separated by spaces. Login is disallowed for user names that
match one of the patterns. Only user names are valid; a numerical user ID is not recognized. By default, login is allowed
for all users. If the pattern takes the form USER@HOST then USER and HOST are separately checked, restricting logins to
particular users from particular hosts. HOST criteria may additionally contain addresses to match in CIDR address/masklen
format. The allow/deny directives are processed in the following order: DenyUsers, AllowUsers, DenyGroups, and finally
AllowGroups.
See PATTERNS in ssh_config(5) for more information on patterns.
DisableForwarding
Disables all forwarding features, including X11, ssh-agent(1), TCP and StreamLocal. This option overrides all other for-
warding-related options and may simplify restricted configurations.
ExposeAuthInfo
Writes a temporary file containing a list of authentication methods and public credentials (e.g. keys) used to authenticate
the user. The location of the file is exposed to the user session through the SSH_USER_AUTH environment variable. The de-
fault is no.
FingerprintHash
Specifies the hash algorithm used when logging key fingerprints. Valid options are: md5 and sha256. The default is
sha256.
ForceCommand
Forces the execution of the command specified by ForceCommand, ignoring any command supplied by the client and ~/.ssh/rc if
present. The command is invoked by using the user's login shell with the -c option. This applies to shell, command, or
subsystem execution. It is most useful inside a Match block. The command originally supplied by the client is available
in the SSH_ORIGINAL_COMMAND environment variable. Specifying a command of internal-sftp will force the use of an in-
process SFTP server that requires no support files when used with ChrootDirectory. The default is none.
GatewayPorts
Specifies whether remote hosts are allowed to connect to ports forwarded for the client. By default, sshd(8) binds remote
port forwardings to the loopback address. This prevents other remote hosts from connecting to forwarded ports.
GatewayPorts can be used to specify that sshd should allow remote port forwardings to bind to non-loopback addresses, thus
allowing other hosts to connect. The argument may be no to force remote port forwardings to be available to the local host
only, yes to force remote port forwardings to bind to the wildcard address, or clientspecified to allow the client to se-
lect the address to which the forwarding is bound. The default is no.
GSSAPIAuthentication
Specifies whether user authentication based on GSSAPI is allowed. The default is no.
GSSAPIKeyExchange
Specifies whether key exchange based on GSSAPI is allowed. GSSAPI key exchange doesn't rely on ssh keys to verify host
identity. The default is no.
GSSAPICleanupCredentials
Specifies whether to automatically destroy the user's credentials cache on logout. The default is yes.
GSSAPIStrictAcceptorCheck
Determines whether to be strict about the identity of the GSSAPI acceptor a client authenticates against. If set to yes
then the client must authenticate against the host service on the current hostname. If set to no then the client may au-
thenticate against any service key stored in the machine's default store. This facility is provided to assist with opera-
tion on multi homed machines. The default is yes.
GSSAPIStoreCredentialsOnRekey
Controls whether the user's GSSAPI credentials should be updated following a successful connection rekeying. This option
can be used to accepted renewed or updated credentials from a compatible client. The default is no.
HostbasedAcceptedKeyTypes
Specifies the key types that will be accepted for hostbased authentication as a list of comma-separated patterns. Alter-
nately if the specified value begins with a '+' character, then the specified key types will be appended to the default set
instead of replacing them. If the specified value begins with a '-' character, then the specified key types (including
wildcards) will be removed from the default set instead of replacing them. The default for this option is:
ecdsa-sha2-nistp256-cert-v01@openssh.com,
ecdsa-sha2-nistp384-cert-v01@openssh.com,
ecdsa-sha2-nistp521-cert-v01@openssh.com,
ssh-ed25519-cert-v01@openssh.com,
rsa-sha2-512-cert-v01@openssh.com,rsa-sha2-256-cert-v01@openssh.com,
ssh-rsa-cert-v01@openssh.com,
ecdsa-sha2-nistp256,ecdsa-sha2-nistp384,ecdsa-sha2-nistp521,
ssh-ed25519,rsa-sha2-512,rsa-sha2-256,ssh-rsa
The list of available key types may also be obtained using "ssh -Q key".
HostbasedAuthentication
Specifies whether rhosts or /etc/hosts.equiv authentication together with successful public key client host authentication
is allowed (host-based authentication). The default is no.
HostbasedUsesNameFromPacketOnly
Specifies whether or not the server will attempt to perform a reverse name lookup when matching the name in the ~/.shosts,
~/.rhosts, and /etc/hosts.equiv files during HostbasedAuthentication. A setting of yes means that sshd(8) uses the name
supplied by the client rather than attempting to resolve the name from the TCP connection itself. The default is no.
HostCertificate
Specifies a file containing a public host certificate. The certificate's public key must match a private host key already
specified by HostKey. The default behaviour of sshd(8) is not to load any certificates.
HostKey
Specifies a file containing a private host key used by SSH. The defaults are /etc/ssh/ssh_host_ecdsa_key,
/etc/ssh/ssh_host_ed25519_key and /etc/ssh/ssh_host_rsa_key.
Note that sshd(8) will refuse to use a file if it is group/world-accessible and that the HostKeyAlgorithms option restricts
which of the keys are actually used by sshd(8).
It is possible to have multiple host key files. It is also possible to specify public host key files instead. In this
case operations on the private key will be delegated to an ssh-agent(1).
HostKeyAgent
Identifies the UNIX-domain socket used to communicate with an agent that has access to the private host keys. If the
string "SSH_AUTH_SOCK" is specified, the location of the socket will be read from the SSH_AUTH_SOCK environment variable.
HostKeyAlgorithms
Specifies the host key algorithms that the server offers. The default for this option is:
ecdsa-sha2-nistp256-cert-v01@openssh.com,
ecdsa-sha2-nistp384-cert-v01@openssh.com,
ecdsa-sha2-nistp521-cert-v01@openssh.com,
ssh-ed25519-cert-v01@openssh.com,
rsa-sha2-512-cert-v01@openssh.com,rsa-sha2-256-cert-v01@openssh.com,
ssh-rsa-cert-v01@openssh.com,
ecdsa-sha2-nistp256,ecdsa-sha2-nistp384,ecdsa-sha2-nistp521,
ssh-ed25519,rsa-sha2-512,rsa-sha2-256,ssh-rsa
The list of available key types may also be obtained using "ssh -Q key".
IgnoreRhosts
Specifies that .rhosts and .shosts files will not be used in HostbasedAuthentication.
/etc/hosts.equiv and /etc/ssh/shosts.equiv are still used. The default is yes.
IgnoreUserKnownHosts
Specifies whether sshd(8) should ignore the user's ~/.ssh/known_hosts during HostbasedAuthentication and use only the sys-
tem-wide known hosts file /etc/ssh/known_hosts. The default is no.
IPQoS Specifies the IPv4 type-of-service or DSCP class for the connection. Accepted values are af11, af12, af13, af21, af22,
af23, af31, af32, af33, af41, af42, af43, cs0, cs1, cs2, cs3, cs4, cs5, cs6, cs7, ef, lowdelay, throughput, reliability, a
numeric value, or none to use the operating system default. This option may take one or two arguments, separated by white-
space. If one argument is specified, it is used as the packet class unconditionally. If two values are specified, the
first is automatically selected for interactive sessions and the second for non-interactive sessions. The default is
lowdelay for interactive sessions and throughput for non-interactive sessions.
KbdInteractiveAuthentication
Specifies whether to allow keyboard-interactive authentication. The argument to this keyword must be yes or no. The de-
fault is to use whatever value ChallengeResponseAuthentication is set to (by default yes).
KerberosAuthentication
Specifies whether the password provided by the user for PasswordAuthentication will be validated through the Kerberos KDC.
To use this option, the server needs a Kerberos servtab which allows the verification of the KDC's identity. The default
is no.
KerberosGetAFSToken
If AFS is active and the user has a Kerberos 5 TGT, attempt to acquire an AFS token before accessing the user's home direc-
tory. The default is no.
KerberosOrLocalPasswd
If password authentication through Kerberos fails then the password will be validated via any additional local mechanism
such as /etc/passwd. The default is yes.
KerberosTicketCleanup
Specifies whether to automatically destroy the user's ticket cache file on logout. The default is yes.
KexAlgorithms
Specifies the available KEX (Key Exchange) algorithms. Multiple algorithms must be comma-separated. Alternately if the
specified value begins with a '+' character, then the specified methods will be appended to the default set instead of re-
placing them. If the specified value begins with a '-' character, then the specified methods (including wildcards) will be
removed from the default set instead of replacing them. The supported algorithms are:
curve25519-sha256
curve25519-sha256@libssh.org
diffie-hellman-group1-sha1
diffie-hellman-group14-sha1
diffie-hellman-group14-sha256
diffie-hellman-group16-sha512
diffie-hellman-group18-sha512
diffie-hellman-group-exchange-sha1
diffie-hellman-group-exchange-sha256
ecdh-sha2-nistp256
ecdh-sha2-nistp384
ecdh-sha2-nistp521
The default is:
curve25519-sha256,curve25519-sha256@libssh.org,
ecdh-sha2-nistp256,ecdh-sha2-nistp384,ecdh-sha2-nistp521,
diffie-hellman-group-exchange-sha256,
diffie-hellman-group16-sha512,diffie-hellman-group18-sha512,
diffie-hellman-group14-sha256,diffie-hellman-group14-sha1
The list of available key exchange algorithms may also be obtained using "ssh -Q kex".
ListenAddress
Specifies the local addresses sshd(8) should listen on. The following forms may be used:
ListenAddress hostname|address [rdomain domain]
ListenAddress hostname:port [rdomain domain]
ListenAddress IPv4_address:port [rdomain domain]
ListenAddress [hostname|address]:port [rdomain domain]
The optional rdomain qualifier requests sshd(8) listen in an explicit routing domain. If port is not specified, sshd will
listen on the address and all Port options specified. The default is to listen on all local addresses on the current de-
fault routing domain. Multiple ListenAddress options are permitted. For more information on routing domains, see
rdomain(4).
LoginGraceTime
The server disconnects after this time if the user has not successfully logged in. If the value is 0, there is no time
limit. The default is 120 seconds.
LogLevel
Gives the verbosity level that is used when logging messages from sshd(8). The possible values are: QUIET, FATAL, ERROR,
INFO, VERBOSE, DEBUG, DEBUG1, DEBUG2, and DEBUG3. The default is INFO. DEBUG and DEBUG1 are equivalent. DEBUG2 and DE-
BUG3 each specify higher levels of debugging output. Logging with a DEBUG level violates the privacy of users and is not
recommended.
MACs Specifies the available MAC (message authentication code) algorithms. The MAC algorithm is used for data integrity protec-
tion. Multiple algorithms must be comma-separated. If the specified value begins with a '+' character, then the specified
algorithms will be appended to the default set instead of replacing them. If the specified value begins with a '-' charac-
ter, then the specified algorithms (including wildcards) will be removed from the default set instead of replacing them.
The algorithms that contain "-etm" calculate the MAC after encryption (encrypt-then-mac). These are considered safer and
their use recommended. The supported MACs are:
hmac-md5
hmac-md5-96
hmac-sha1
hmac-sha1-96
hmac-sha2-256
hmac-sha2-512
umac-64@openssh.com
umac-128@openssh.com
hmac-md5-etm@openssh.com
hmac-md5-96-etm@openssh.com
hmac-sha1-etm@openssh.com
hmac-sha1-96-etm@openssh.com
hmac-sha2-256-etm@openssh.com
hmac-sha2-512-etm@openssh.com
umac-64-etm@openssh.com
umac-128-etm@openssh.com
The default is:
umac-64-etm@openssh.com,umac-128-etm@openssh.com,
hmac-sha2-256-etm@openssh.com,hmac-sha2-512-etm@openssh.com,
hmac-sha1-etm@openssh.com,
umac-64@openssh.com,umac-128@openssh.com,
hmac-sha2-256,hmac-sha2-512,hmac-sha1
The list of available MAC algorithms may also be obtained using "ssh -Q mac".
Match Introduces a conditional block. If all of the criteria on the Match line are satisfied, the keywords on the following
lines override those set in the global section of the config file, until either another Match line or the end of the file.
If a keyword appears in multiple Match blocks that are satisfied, only the first instance of the keyword is applied.
The arguments to Match are one or more criteria-pattern pairs or the single token All which matches all criteria. The
available criteria are User, Group, Host, LocalAddress, LocalPort, RDomain, and Address (with RDomain representing the
rdomain(4) on which the connection was received.)
The match patterns may consist of single entries or comma-separated lists and may use the wildcard and negation operators
described in the PATTERNS section of ssh_config(5).
The patterns in an Address criteria may additionally contain addresses to match in CIDR address/masklen format, such as
192.0.2.0/24 or 2001:db8::/32. Note that the mask length provided must be consistent with the address - it is an error to
specify a mask length that is too long for the address or one with bits set in this host portion of the address. For exam-
ple, 192.0.2.0/33 and 192.0.2.0/8, respectively.
Only a subset of keywords may be used on the lines following a Match keyword. Available keywords are AcceptEnv,
AllowAgentForwarding, AllowGroups, AllowStreamLocalForwarding, AllowTcpForwarding, AllowUsers, AuthenticationMethods,
AuthorizedKeysCommand, AuthorizedKeysCommandUser, AuthorizedKeysFile, AuthorizedPrincipalsCommand,
AuthorizedPrincipalsCommandUser, AuthorizedPrincipalsFile, Banner, ChrootDirectory, ClientAliveCountMax,
ClientAliveInterval, DenyGroups, DenyUsers, ForceCommand, GatewayPorts, GSSAPIAuthentication, HostbasedAcceptedKeyTypes,
HostbasedAuthentication, HostbasedUsesNameFromPacketOnly, IPQoS, KbdInteractiveAuthentication, KerberosAuthentication,
LogLevel, MaxAuthTries, MaxSessions, PasswordAuthentication, PermitEmptyPasswords, PermitListen, PermitOpen,
PermitRootLogin, PermitTTY, PermitTunnel, PermitUserRC, PubkeyAcceptedKeyTypes, PubkeyAuthentication, RekeyLimit,
RevokedKeys, RDomain, SetEnv, StreamLocalBindMask, StreamLocalBindUnlink, TrustedUserCAKeys, X11DisplayOffset,
X11Forwarding and X11UseLocalHost.
MaxAuthTries
Specifies the maximum number of authentication attempts permitted per connection. Once the number of failures reaches half
this value, additional failures are logged. The default is 6.
MaxSessions
Specifies the maximum number of open shell, login or subsystem (e.g. sftp) sessions permitted per network connection. Mul-
tiple sessions may be established by clients that support connection multiplexing. Setting MaxSessions to 1 will effec-
tively disable session multiplexing, whereas setting it to 0 will prevent all shell, login and subsystem sessions while
still permitting forwarding. The default is 10.
MaxStartups
Specifies the maximum number of concurrent unauthenticated connections to the SSH daemon. Additional connections will be
dropped until authentication succeeds or the LoginGraceTime expires for a connection. The default is 10:30:100.
Alternatively, random early drop can be enabled by specifying the three colon separated values start:rate:full (e.g.
"10:30:60"). sshd(8) will refuse connection attempts with a probability of rate/100 (30%) if there are currently start
(10) unauthenticated connections. The probability increases linearly and all connection attempts are refused if the number
of unauthenticated connections reaches full (60).
PasswordAuthentication
Specifies whether password authentication is allowed. The default is yes.
PermitEmptyPasswords
When password authentication is allowed, it specifies whether the server allows login to accounts with empty password
strings. The default is no.
PermitListen
Specifies the addresses/ports on which a remote TCP port forwarding may listen. The listen specification must be one of
the following forms:
PermitListen port
PermitListen host:port
Multiple permissions may be specified by separating them with whitespace. An argument of any can be used to remove all re-
strictions and permit any listen requests. An argument of none can be used to prohibit all listen requests. The host name
may contain wildcards as described in the PATTERNS section in ssh_config(5). The wildcard '*' can also be used in place of
a port number to allow all ports. By default all port forwarding listen requests are permitted. Note that the
GatewayPorts option may further restrict which addresses may be listened on. Note also that ssh(1) will request a listen
host of "localhost" if no listen host was specifically requested, and this this name is treated differently to explicit lo-
calhost addresses of "127.0.0.1" and "::1".
PermitOpen
Specifies the destinations to which TCP port forwarding is permitted. The forwarding specification must be one of the fol-
lowing forms:
PermitOpen host:port
PermitOpen IPv4_addr:port
PermitOpen [IPv6_addr]:port
Multiple forwards may be specified by separating them with whitespace. An argument of any can be used to remove all re-
strictions and permit any forwarding requests. An argument of none can be used to prohibit all forwarding requests. The
wildcard '*' can be used for host or port to allow all hosts or ports, respectively. By default all port forwarding re-
quests are permitted.
PermitRootLogin
Specifies whether root can log in using ssh(1). The argument must be yes, prohibit-password, forced-commands-only, or no.
The default is prohibit-password.
If this option is set to prohibit-password (or its deprecated alias, without-password), password and keyboard-interactive
authentication are disabled for root.
If this option is set to forced-commands-only, root login with public key authentication will be allowed, but only if the
command option has been specified (which may be useful for taking remote backups even if root login is normally not al-
lowed). All other authentication methods are disabled for root.
If this option is set to no, root is not allowed to log in.
PermitTTY
Specifies whether pty(4) allocation is permitted. The default is yes.
PermitTunnel
Specifies whether tun(4) device forwarding is allowed. The argument must be yes, point-to-point (layer 3), ethernet (layer
2), or no. Specifying yes permits both point-to-point and ethernet. The default is no.
Independent of this setting, the permissions of the selected tun(4) device must allow access to the user.
PermitUserEnvironment
Specifies whether ~/.ssh/environment and environment= options in ~/.ssh/authorized_keys are processed by sshd(8). Valid
options are yes, no or a pattern-list specifying which environment variable names to accept (for example "LANG,LC_*"). The
default is no. Enabling environment processing may enable users to bypass access restrictions in some configurations using
mechanisms such as LD_PRELOAD.
PermitUserRC
Specifies whether any ~/.ssh/rc file is executed. The default is yes.
PidFile
Specifies the file that contains the process ID of the SSH daemon, or none to not write one. The default is /run/sshd.pid.
Port Specifies the port number that sshd(8) listens on. The default is 22. Multiple options of this type are permitted. See
also ListenAddress.
PrintLastLog
Specifies whether sshd(8) should print the date and time of the last user login when a user logs in interactively. The de-
fault is yes.
PrintMotd
Specifies whether sshd(8) should print /etc/motd when a user logs in interactively. (On some systems it is also printed by
the shell, /etc/profile, or equivalent.) The default is yes.
PubkeyAcceptedKeyTypes
Specifies the key types that will be accepted for public key authentication as a list of comma-separated patterns. Alter-
nately if the specified value begins with a '+' character, then the specified key types will be appended to the default set
instead of replacing them. If the specified value begins with a '-' character, then the specified key types (including
wildcards) will be removed from the default set instead of replacing them. The default for this option is:
ecdsa-sha2-nistp256-cert-v01@openssh.com,
ecdsa-sha2-nistp384-cert-v01@openssh.com,
ecdsa-sha2-nistp521-cert-v01@openssh.com,
ssh-ed25519-cert-v01@openssh.com,
rsa-sha2-512-cert-v01@openssh.com,rsa-sha2-256-cert-v01@openssh.com,
ssh-rsa-cert-v01@openssh.com,
ecdsa-sha2-nistp256,ecdsa-sha2-nistp384,ecdsa-sha2-nistp521,
ssh-ed25519,rsa-sha2-512,rsa-sha2-256,ssh-rsa
The list of available key types may also be obtained using "ssh -Q key".
PubkeyAuthentication
Specifies whether public key authentication is allowed. The default is yes.
RekeyLimit
Specifies the maximum amount of data that may be transmitted before the session key is renegotiated, optionally followed a
maximum amount of time that may pass before the session key is renegotiated. The first argument is specified in bytes and
may have a suffix of 'K', 'M', or 'G' to indicate Kilobytes, Megabytes, or Gigabytes, respectively. The default is between
'1G' and '4G', depending on the cipher. The optional second value is specified in seconds and may use any of the units
documented in the TIME FORMATS section. The default value for RekeyLimit is default none, which means that rekeying is
performed after the cipher's default amount of data has been sent or received and no time based rekeying is done.
RevokedKeys
Specifies revoked public keys file, or none to not use one. Keys listed in this file will be refused for public key au-
thentication. Note that if this file is not readable, then public key authentication will be refused for all users. Keys
may be specified as a text file, listing one public key per line, or as an OpenSSH Key Revocation List (KRL) as generated
by ssh-keygen(1). For more information on KRLs, see the KEY REVOCATION LISTS section in ssh-keygen(1).
RDomain
Specifies an explicit routing domain that is applied after authentication has completed. The user session, as well and any
forwarded or listening IP sockets, will be bound to this rdomain(4). If the routing domain is set to %D, then the domain
in which the incoming connection was received will be applied.
SetEnv Specifies one or more environment variables to set in child sessions started by sshd(8) as "NAME=VALUE". The environment
value may be quoted (e.g. if it contains whitespace characters). Environment variables set by SetEnv override the default
environment and any variables specified by the user via AcceptEnv or PermitUserEnvironment.
StreamLocalBindMask
Sets the octal file creation mode mask (umask) used when creating a Unix-domain socket file for local or remote port for-
warding. This option is only used for port forwarding to a Unix-domain socket file.
The default value is 0177, which creates a Unix-domain socket file that is readable and writable only by the owner. Note
that not all operating systems honor the file mode on Unix-domain socket files.
StreamLocalBindUnlink
Specifies whether to remove an existing Unix-domain socket file for local or remote port forwarding before creating a new
one. If the socket file already exists and StreamLocalBindUnlink is not enabled, sshd will be unable to forward the port
to the Unix-domain socket file. This option is only used for port forwarding to a Unix-domain socket file.
The argument must be yes or no. The default is no.
StrictModes
Specifies whether sshd(8) should check file modes and ownership of the user's files and home directory before accepting lo-
gin. This is normally desirable because novices sometimes accidentally leave their directory or files world-writable. The
default is yes. Note that this does not apply to ChrootDirectory, whose permissions and ownership are checked uncondition-
ally.
Subsystem
Configures an external subsystem (e.g. file transfer daemon). Arguments should be a subsystem name and a command (with op-
tional arguments) to execute upon subsystem request.
The command sftp-server implements the SFTP file transfer subsystem.
Alternately the name internal-sftp implements an in-process SFTP server. This may simplify configurations using
ChrootDirectory to force a different filesystem root on clients.
By default no subsystems are defined.
SyslogFacility
Gives the facility code that is used when logging messages from sshd(8). The possible values are: DAEMON, USER, AUTH, LO-
CAL0, LOCAL1, LOCAL2, LOCAL3, LOCAL4, LOCAL5, LOCAL6, LOCAL7. The default is AUTH.
TCPKeepAlive
Specifies whether the system should send TCP keepalive messages to the other side. If they are sent, death of the connec-
tion or crash of one of the machines will be properly noticed. However, this means that connections will die if the route
is down temporarily, and some people find it annoying. On the other hand, if TCP keepalives are not sent, sessions may
hang indefinitely on the server, leaving "ghost" users and consuming server resources.
The default is yes (to send TCP keepalive messages), and the server will notice if the network goes down or the client host
crashes. This avoids infinitely hanging sessions.
To disable TCP keepalive messages, the value should be set to no.
This option was formerly called KeepAlive.
TrustedUserCAKeys
Specifies a file containing public keys of certificate authorities that are trusted to sign user certificates for authenti-
cation, or none to not use one. Keys are listed one per line; empty lines and comments starting with '#' are allowed. If
a certificate is presented for authentication and has its signing CA key listed in this file, then it may be used for au-
thentication for any user listed in the certificate's principals list. Note that certificates that lack a list of princi-
pals will not be permitted for authentication using TrustedUserCAKeys. For more details on certificates, see the CERTIFI-
CATES section in ssh-keygen(1).
UseDNS Specifies whether sshd(8) should look up the remote host name, and to check that the resolved host name for the remote IP
address maps back to the very same IP address.
If this option is set to no (the default) then only addresses and not host names may be used in ~/.ssh/authorized_keys from
and sshd_config Match Host directives.
UsePAM Enables the Pluggable Authentication Module interface. If set to yes this will enable PAM authentication using
ChallengeResponseAuthentication and PasswordAuthentication in addition to PAM account and session module processing for all
authentication types.
Because PAM challenge-response authentication usually serves an equivalent role to password authentication, you should dis-
able either PasswordAuthentication or ChallengeResponseAuthentication.
If UsePAM is enabled, you will not be able to run sshd(8) as a non-root user. The default is no.
VersionAddendum
Optionally specifies additional text to append to the SSH protocol banner sent by the server upon connection. The default
is none.
X11DisplayOffset
Specifies the first display number available for sshd(8)'s X11 forwarding. This prevents sshd from interfering with real
X11 servers. The default is 10.
X11Forwarding
Specifies whether X11 forwarding is permitted. The argument must be yes or no. The default is no.
When X11 forwarding is enabled, there may be additional exposure to the server and to client displays if the sshd(8) proxy
display is configured to listen on the wildcard address (see X11UseLocalhost), though this is not the default. Addition-
ally, the authentication spoofing and authentication data verification and substitution occur on the client side. The se-
curity risk of using X11 forwarding is that the client's X11 display server may be exposed to attack when the SSH client
requests forwarding (see the warnings for ForwardX11 in ssh_config(5)). A system administrator may have a stance in which
they want to protect clients that may expose themselves to attack by unwittingly requesting X11 forwarding, which can war-
rant a no setting.
Note that disabling X11 forwarding does not prevent users from forwarding X11 traffic, as users can always install their
own forwarders.
X11UseLocalhost
Specifies whether sshd(8) should bind the X11 forwarding server to the loopback address or to the wildcard address. By de-
fault, sshd binds the forwarding server to the loopback address and sets the hostname part of the DISPLAY environment vari-
able to localhost. This prevents remote hosts from connecting to the proxy display. However, some older X11 clients may
not function with this configuration. X11UseLocalhost may be set to no to specify that the forwarding server should be
bound to the wildcard address. The argument must be yes or no. The default is yes.
XAuthLocation
Specifies the full pathname of the xauth(1) program, or none to not use one. The default is /usr/bin/xauth.
TIME FORMATS
sshd(8) command-line arguments and configuration file options that specify time may be expressed using a sequence of the form:
time[qualifier], where time is a positive integer value and qualifier is one of the following:
seconds
s | S seconds
m | M minutes
h | H hours
d | D days
w | W weeks
Each member of the sequence is added together to calculate the total time value.
Time format examples:
600 600 seconds (10 minutes)
10m 10 minutes
1h30m 1 hour 30 minutes (90 minutes)
TOKENS
Arguments to some keywords can make use of tokens, which are expanded at runtime:
%% A literal '%'.
%D The routing domain in which the incoming connection was received.
%F The fingerprint of the CA key.
%f The fingerprint of the key or certificate.
%h The home directory of the user.
%i The key ID in the certificate.
%K The base64-encoded CA key.
%k The base64-encoded key or certificate for authentication.
%s The serial number of the certificate.
%T The type of the CA key.
%t The key or certificate type.
%U The numeric user ID of the target user.
%u The username.
AuthorizedKeysCommand accepts the tokens %%, %f, %h, %k, %t, %U, and %u.
AuthorizedKeysFile accepts the tokens %%, %h, %U, and %u.
AuthorizedPrincipalsCommand accepts the tokens %%, %F, %f, %h, %i, %K, %k, %s, %T, %t, %U, and %u.
AuthorizedPrincipalsFile accepts the tokens %%, %h, %U, and %u.
ChrootDirectory accepts the tokens %%, %h, %U, and %u.
RoutingDomain accepts the token %D.
FILES
/etc/ssh/sshd_config
Contains configuration data for sshd(8). This file should be writable by root only, but it is recommended (though not nec-
essary) that it be world-readable.
SEE ALSO
sftp-server(8), sshd(8)
AUTHORS
OpenSSH is a derivative of the original and free ssh 1.2.12 release by Tatu Ylonen. Aaron Campbell, Bob Beck, Markus Friedl, Niels
Provos, Theo de Raadt and Dug Song removed many bugs, re-added newer features and created OpenSSH. Markus Friedl contributed the